C-FXFX Posted July 16, 2008 Report Share Posted July 16, 2008 In a B,L or 407 what do you use has hard tie down point for the guy's ''harness and monkey tail''in the back when operating door's off or sliding open. Any info on that or maybe some ''STC number '' will be fine. Guy Quote Link to comment Share on other sites More sharing options...
Skids Up Posted July 16, 2008 Report Share Posted July 16, 2008 Do I dare say? Jjust tape the seatbelt latch, and hook it through the seat belt? That worked for a lot of years but may not be acceptable nowdays. And if it isn't, someone will let me know! Quote Link to comment Share on other sites More sharing options...
bleed air Posted July 16, 2008 Report Share Posted July 16, 2008 If you can get your hands on the triangular shaped flat plate off the end of a scrapped seat belt assembly, add it on to one of the attachment points for the existing seatbelts between the outside and middle seat. Some disassembly/assembly/longer bolt/AME blessing/supervision required. It will provide a solid attachment for a climber's locking carabiner. I know, I know, it's not approved, but it's a reasonable solution in a pinch. Good Luck. Quote Link to comment Share on other sites More sharing options...
Blackmac Posted July 16, 2008 Report Share Posted July 16, 2008 We are back to liability issue's if system is not approved, I know I'm a pain in the you know what. Family sue's, WCB, etc.. Try Dart or call Eagle in Calgary for info. Cheers, Don Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.