Jump to content
Sign in to follow this  
RonnyRotor

407 Power On Paper

Recommended Posts

Its the same as the increase in gross weight from 5000 to 5250...get yourself a sticker :rolleyes:

Share this post


Link to post
Share on other sites
There must be a software and limitations mod to the Fadec Software as well otherwise all your gauges will be labelled "E"

 

Nope, I think your avatar got the best of you, just a FM supplement, and as DGP says, a sticker.

 

The only other caviat is that you must do a power check and compare it to a chart in the supplement each time you want to use the new limitaions...

Share this post


Link to post
Share on other sites

And we know everyone will be doing that :rolleyes::lol:..just check for those big E's after shutdown!!!

Share this post


Link to post
Share on other sites
Nope, I think your avatar got the best of you, just a FM supplement, and as DGP says, a sticker.

 

The only other caviat is that you must do a power check and compare it to a chart in the supplement each time you want to use the new limitaions...

 

I think you misunderstood my perspective. You can't put a piece of paper in the book and call it an increase in power. The STC reads that you can have a higher gross and IGE/OGE performance than standard. It had this capability already (allegedly) to do this you are just allowed to do it now. My point is that you can't call it an increase in horsepower if you are not allowed to pull the collective up any higher. If you ask the engine for more power without any changes to the FADEC you will have exceedences all over the place.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...