B3e tail rotor spider assembly

[Heliian]

Poke the vent hole.

[ktmnomad]

Thanks for the great info greyhorizons 

After you showed the limitations for oil usage/leaking I saw how much more we were adding from the leak. 

Lip seal has been changed now and I told them I would like a balance done so we are in the process of doing that today. 

Thanks again!!

[ktmnomad]

On 2/25/2019 at 10:36 PM, Heliian said:

Poke the vent hole.

Was the mgb input seal leaking a lot. Lots and lots ! Fixed now

[Heliian]

6 hours ago, ktmnomad said:

Was the mgb input seal leaking a lot. Lots and lots ! Fixed now

My mistake, I read tgb.  Glad you're getting it all sorted out.  I had an upper seal go once and the mgb looked like a chocolate fountain.

[lamanated]

also clean that shaft as the exhaust soot will work its way  onto the bushing and cause the bushing to not move unless you have hyds on. If you have a B1 and down and loose Hyds with a spider assy that wont slide ,your in a world of hurt if you lose Hyds.  I saw it twice. If you have the pitch links off. try and move the pedals back and forth on an inspection, to ensure the spider assy  moves ..